Location: Home > Food Equipment > Single Lab Machine

Bio Fermentation TankReturn

Bio Fermentation Tank

TW-XJD10 fermentation tank structure is made by Stainless steel, integral design, multi-function, no dead space in tank. Specially applicable for laboratory,; can be used alone or as the seeding tank to be used with other fermentation tank; can equip guide shell expanding to airlift fermentation.

  • * Capacity：5L/7L/10L/15L…
  • * Coefficient of charge：0.65~0.8, 0.7 best
  • * Surface Roughness: Ra0.4 um polished inside (mechanical polishing or electrolytic polishing)。Ra0.6~0.8 um polished outside (matte process)，or grit-blasting
  • * Pressure：0.01Mpa ~0.05 Mpa。pressure gauge with pressure sensor, hand regulation (standard configuration)， automatic adjusted by proportional control Valve or pneumatic valve (option)
  • * Material： SS316L contact with material,other part is SS304
  • * Stirring type：top Mechanical stirring (or below magnetic coupling mixing)，adopt single end and double mechanical seal technology. Two sets six blades blender，three baffle blades, with mechanical defoaming pulp
  • * Temperature controller：PID digital control，water forced circulation by circulation pump, auto controlled by magnetic valve, PT100 temperature sensor.
  • * Sterilization type：sterilization on site, or sterilization by high pressure autoclave
  • * Temperature range：5~65±0.2℃,resolution 0.1℃
  • * Sterilization temperature：100 ~130℃
  • * Stirring speed：50~1000rpm±5%* resolution 1rmp，adjusted by convertor. the speed is confirmed according to the tank size and material property.
  • * Fetch valve and tank bottom valve can be sterilized any time.
  • * Equipped with standard PH, DO electrode, bubble level, temperature sensor, feed interface,，large side wide view goggle, security light.